NYRD900 80GHz Anti-corrosion and Explosion-proof Radar Level Transmitter for Dusty Conditions with CE and IP67 Report
NYRD900 80GHz Anti-corrosion and Explosion-proof Radar Level Transmitter Product Description
The NYRD900 radar level transmitter is widely used in remote target detection, remote imaging, multispectral imaging, strong smoke and dust conditions, etc. As it uses the millimeter-wave band with a higher frequency than the Ku band , it can detect smaller targets and achieve more accurate positioning than microwave radar, with higher resolution and stronger security.
NYRD900 80GHz Anti-corrosion and Explosion-proof Radar Level Transmitter Design Features
1.Good transient performance: Based on the self-developed CMOS millimeter-wave RF chip, to achieve a more compact RF structure, higher noise-signal ratio.
2.The 5GHz working bandwidth makes the product have a higher measurement resolution ratio and measurement accuracy
3.Coherence: a coherent current-driven dipole shock generation or a nonlinear differential frequency effect of a coherent laser pulse generation
4.Low energy: millimeter wave photon energy has only a few millielectron volt, there will be no X-ray ionization and destruction of the substance to be detected, so it is not easy to destroy the substance to be detected
5.Strong penetration: Strong penetration for non-polar substances. Many nonmetallic nonpolar materials absorb less rays in this band and, therefore, can be used to probe the internal structure of the material. For example, ceramics / cardboard / plastic products / foam are transparent to this band of electromagnetic radiation, and can also be used for airport / station safety monitoring, such as exploring machinery / explosives and drugs, or for circuit board welding detection.
NYRD900 80GHz Anti-corrosion and Explosion-proof Radar Level Transmitter Typical Applications
1. Suitable for the measurement of narrow space or guided wave tube
2. Applicable to super large tank (150m) and small tank
3. High-precision, high-hygiene grade of measurement
4. Occasions with complex process conditions (mixing, heating Rod, ladder, floating roof, strong dust, strong steam, etc.)
NYRD900 80GHz Anti-corrosion and Explosion-proof Radar Level Transmitter Technical Parameters
| Product Model | NYRD900 |
| Transmission frequency | 76Hz-81Hz, FM scanning frequency width 5GHz |
| Antenna form | Lens antenna, antiseptic lens antenna |
| Antenna material | PTFE, 304＋PTFE |
| Measuring range | 0.08-150m |
| Measuring accuracy | 0.05%-0.1% F.S |
| Power supply | 24VDC, 220VAC |
| Signal output | 4...20mA/HART/RS485/Modbus... |
| Process temperature | -40~+130℃,-40~+260℃ (≥260℃ can be customized) |
| Process pressure | -0.1~2.0MPa |
| Process connection | Thread, flange |
| Protection Class | IP67, IP68 (optional) |
| Explosion-proof grade | Exia II CT6 Ga, Exd II CT6 Gb |
Note: Products can be customized according to the specific requirements of users.
NYRD900 80GHz Anti-corrosion and Explosion-proof Radar Level Transmitter Pictures
|
|
NYRD900 80GHz Anti-corrosion and Explosion-proof Radar Level Transmitter for Dusty Conditions with CE and IP67 Report Images
|
